1 / 5
Dillon Case Feeder to Spring Tube to Lee Tube Adapter — image 1
1 / 5

Dillon Case Feeder to Spring Tube to Lee Tube Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows you to connect your Dillon case feeder to the Lee APP, Pro 6000, and probably more.

Rating
0 / 5
Likes
13
Downloads
147
Makes
1
Views
907
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd.

There are 4 major components:

  1. Dillon case feeder to spring tube adapter.
  2. A spring tube. Can get one off AliExpress or something.
  3. Spring tube to Lee tube adapter.
  4. Lee tube that probably came with your Lee press.

There are two spring tube sizes supported. 16mm is the one to get-- it will work for anything up to like .45 ACP or 6.5 Creedmoor or whatever.

14mm is also supported since it's what I had on hand initially, but it will not fit .45 ACP, etc.

Also included is an optional flange to mount the case feeder to the bench with a 1" wooden dowel from Home Depot or something.

Recommended print settings for the adapters:

  • 0.12mm layer height
  • 2 walls
  • 15% infill

Recommended print settings for the flange:

  • 0.2mm layer height
  • 4 walls
  • 25% infill

Video: 

Tags