IKEA Lack leg stabilazor including Honeycomb Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Lack Table Reinforcements with a second function as a honeycomb shelf
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I came across the original design I thought it would be handy if you could mount a few of the Honeycomb shelves in the struts so I downloaded the file.
I was a little disappointed to find that the hexagonal design used did not match the "standardized" Honeycomb design.
So what are you doing right?
You sit down until 5 a.m. and connect both parts to form a practical 2 in 1 table leg-stabilizer-shelf.
And as you can see, bam it works, of course you only mount single mounts but it is extremely practical, for example for the Sovol Toolholder from EsZett https://www.printables.com/model/972609-honeycomb-toolholder-sv08 or the cutter hook https://www.printables.com/model/457073-honeycomb-wall-cutters from Janis