Acros ZS44 blocklock upper headset press adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for the ZS44 blocklock upper headset to be used with a generic M12 threaded rod based headset presses.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
An adapter to be used with one of the generic M12 based headset presses such as the Toopre headset press on Aliexpress.
The adapter features a locating feature for the inside diameter of the bearing and a relief which prevents force being applied to the inner ring of the bearing which could cause damage as well as a relief for the blocklock nub on the cup.
I've printed the adapter out of Prusament PC-CF with 4 perimeters and 50% infill. Other materials might also be suitable.
In some cases the hole in the middle of the adapter might be a little bit too tight to fit around the threaded rod on the headset press, if this is the case I recommend drilling it out with a 12mm drill bit.