6mm scale Residential- Mad Scientist's House - BattleTech Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original work designed to be compatible with BattleTech and other 6mm Games.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
My own original work designed to be compatible with BattleTech and other 6mm Games. The Mad Scientist's. House is a quirky abode where things that should not be described are created. In BattleTech map scale, this is 2 Level, 1 hex residential building. Units with hex bases should be able to perch on the supports on top, but be careful when doing so!
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
This shouldn't require any supports and even a brim shouldn't be needed.