1 / 1
Dragonhorn (BMG+Dragon Hotend in Artillery Genius) — zdjęcie 1

Dragonhorn (BMG+Dragon Hotend in Artillery Genius)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Airduct to use in the Artillery genius with a BMG extruder and a V6 or Dragon Hotend.

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
0
Wyświetlenia
736
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Airduct to use in the Artillery genius or sidewinder with a BMG extruder and a V6 or Dragon Hotend to fit a 5015 fan. It includes mount for a ABL probe in the Waggster mod style.

It might work with a Vulcano hotend, but probably needs to be extended.

 

This is a remix of the fantastic Ramhorn v2 duct: https://www.thingiverse.com/thing:4760471

And the duct for the hotend fan is remixed from: https://www.thingiverse.com/thing:4489118

 

To install, ziptie the two ducts together to make sure that the hotend fan stays clear of the x-axis stepper.

 

To slice, I ran into a bit of weirdness with prusaslicer. The mesh is not perfect. Cura worked fine. I printed it in PETG witout supports at 0.2 layer height. To not impede the light coming from the LED, print with a transparent material.

 

The offsets for the ABL are:

X=-22.74

Y=-49.37

 I regulate Z by hand, so make sure that your nozzle is lower than the shroud. I use around 2mm, so that would be good to start.

Tagi