1 / 1
Dragonhorn (BMG+Dragon Hotend in Artillery Genius) — image 1

Dragonhorn (BMG+Dragon Hotend in Artillery Genius)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Airduct to use in the Artillery genius with a BMG extruder and a V6 or Dragon Hotend.

Rating
0 / 5
Likes
3
Downloads
32
Makes
0
Views
736
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Airduct to use in the Artillery genius or sidewinder with a BMG extruder and a V6 or Dragon Hotend to fit a 5015 fan. It includes mount for a ABL probe in the Waggster mod style.

It might work with a Vulcano hotend, but probably needs to be extended.

 

This is a remix of the fantastic Ramhorn v2 duct: https://www.thingiverse.com/thing:4760471

And the duct for the hotend fan is remixed from: https://www.thingiverse.com/thing:4489118

 

To install, ziptie the two ducts together to make sure that the hotend fan stays clear of the x-axis stepper.

 

To slice, I ran into a bit of weirdness with prusaslicer. The mesh is not perfect. Cura worked fine. I printed it in PETG witout supports at 0.2 layer height. To not impede the light coming from the LED, print with a transparent material.

 

The offsets for the ABL are:

X=-22.74

Y=-49.37

 I regulate Z by hand, so make sure that your nozzle is lower than the shroud. I use around 2mm, so that would be good to start.

Tags