GRAND DESIGN MOMENTUM GARAGE POWER PANEL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
8,93 € – 10,92 € netto (bez VAT)
Dla pliku: POWER PANEL -3_0.2mm_ABS_MK3_9h24m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 9,93 € netto (środek widełek).
- Masa podana przez autora
- 98 g
- Czas druku podany przez autora
- 9,41 godz.
- Materiał u źródła
- ABS
- Materiał wyceny
- ABS
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
GD. Momentum garage. +2 switch slots for main power and Diesel Heater, also added 2" Volt Guage, and 5/8 aux power
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to add more switches to the old panel and couldn't find any new ones that would fit the hole and or looked good. I added a diesel heater to the garage and needed more power and also wanted to add a switch so I could shut it off when not in use. Plus I hated the way the manufactures panel was laid out because the actual lights where the third switch on and when walking from the living room to the garage you would end up raising the bed in search of the light switch. You can see the first switch on my panel is the lights and I have it so the switch light stays on. (no more unintentional bed movements) I have a Diesel fuel tank that holds 20 gallons of fuel and has a hand pump on it so I also added and Aux 12v power port so I can hook up a small file pump to transfer fuel. I also added a master switch for when the Trailer is not in use so their won't be any power draw on the batteries. after hooking everything up I had to run a second power wire from the fuse box to the panel because the long distance was causing the power to drop enough that the diesel heater would shut down for low voltage during it's startup process.