1 / 3
GRAND DESIGN MOMENTUM GARAGE POWER PANEL — image 1
1 / 3

GRAND DESIGN MOMENTUM GARAGE POWER PANEL

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€8.93 – €10.92 net (excluding VAT)

For file: POWER PANEL -3_0.2mm_ABS_MK3_9h24m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €9.93 excluding VAT (range midpoint).

Weight reported by the author
98 g
Print time reported by the author
9.41 hr
Source material
ABS
Estimate material
ABS
Estimate printer
Bambu Lab X1 Carbon - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

GD. Momentum garage. +2 switch slots for main power and Diesel Heater, also added 2" Volt Guage, and 5/8 aux power

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
56
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed to add more switches to the old panel and couldn't find any new ones that would fit the hole and or looked good. I added a diesel heater to the garage and needed more power and also wanted to add a switch so I could shut it off when not in use. Plus I hated the way the manufactures panel was laid out because the actual lights where the third  switch on and when walking from the living room to the garage you would end up raising the bed in search of the light switch. You can see the first switch on my panel is the lights and I have it so the switch light stays on. (no more unintentional bed movements) I have a Diesel fuel tank that holds 20 gallons of fuel and has a hand pump on it so I also added and Aux 12v power port so I can hook up a small file pump to transfer fuel. I also added a master switch for when the Trailer is not in use so their won't be any power draw on the batteries. after hooking everything up I had to run a second power wire from the fuse box to the panel because the long distance was causing the power to drop enough that the diesel heater would shut down for low voltage during it's startup process. 

Tags