Linkable Festool MFT Storage Tray - with tic-tac-toe game

This is a storage tray for dominos or various parts, with a little treat in the bottom - a Festool domino tic-tac-toe game! Use the 4mm dominos as game pieces and play a game about who is doing the cleanup of the workshop! 

You can mount the tray either to a wall or to the Festool MFT-3 using a remixed shorter version of the Festool MFT-3 nut in the same principle as the original Festool accessories. The linking feature makes this look very clean when connected in a row.

For use with the MFT-nut, a M5 x 16mm socket cap screw will fit perfectly with a nut on the backside. Remember to use the remixed MFT-nut with 19.5mm length.

These models are based on an initial concept from Wiha, but is modelled from scratch, adding compatibility with MFT-3 as well as changing the screw hole dimensions for allowing machine screws. Check out http://www.tlbx3d.com for additional great holders in the same system. These will not link to the MFT-3, but will still work together if you plan to have it on the wall. 

Alternative game pieces

If you do not have the 4mm dominos available, you can print your own with these great dry fit models from @paulengel_1587216: https://www.printables.com/model/689403-festool-reduced-size-dominos-for-dry-fit-4mm-5mm-6

These are also nice for dry fitting domino joints before final assembly.

Other models

Check this model for an overview over the available holders in the same system:

https://www.printables.com/model/1106529-linkable-toolholders-festool-mft-compatible

All models can be interlinked, allowing for a nice looking tool storage with flexible mounting options. All holders from version 2.0 can be attached to the Festool MFT-3.

Releases

Printing notes

Have had very good results with either Protopasta Matte fiber HTPLA or Add:North HT-PLA Pro Matte. Prints well without support, but in some cases supports can be used to avoid artifacts in the mounting holes. Does not require any special infill and I have usually used 15% infill.

If you simply want a single color print or want to color parts yourselves, you can use the combined version attached. If you want to add colored logo and tic-tac-toe pattern you can use the separate files and import them as a single object with multiple parts in the slicer. It is then easier to add the color afterwards. A .3mf combined file is added for direct import in the slicer.