DJI OM4 - Cold Shoe Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DJI OM4 Cold Shoe mount so you can use it with multiple accesories like Mics that use this standard
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 153
- Wydruki
- 2
- Wyświetlenia
- 1264
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed to mount my Rode Microphone Go 2 transmitter in the DJI OM4 gimbal, but it doesn't have a cold shoe mount.
I searched everywhere and couldn't find a nice and easy adapter so I created one quickly on Tinkercard (sorry I am not a designer).
I also used this Cold Shoe socket I found here and imported it in the design.
The accesory fits well and stays in place to hold light accesories, not sure how it behaves with heavier ones nor the impact on the movements of the gimbal. I tried it with the Rode Microphone Go 2 transmitter and because its very light it works well.
Printed it in PLA 0.20mm Speed.
30% Infill
It takes 35 minutes to print
Note: Due to the fact that the 3D printed piece is very light, you can keep it attached to the gimbal. Just make sure you move it upwards to ensure the gimbal locks with its own mechanism. If you don't feel comfortable, just take it away and use it when needed.
If you want to adapt anything, feel free to tinker with the model on Tinkercard here.
Hope you like it! If so let me know with a comment and a like 😊