1 / 8
Apple HomePod (2nd gen) IKEA Fjällbo mount - (wall version available) — zdjęcie 1
1 / 8

Apple HomePod (2nd gen) IKEA Fjällbo mount - (wall version available)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this mount so I could fix my HomePods to my Ikea Fjällbo under my television and have them placed farther apart.

Ocena
0 / 5
Polubienia
11
Pobrania
68
Wydruki
0
Wyświetlenia
644
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

I made this mount so I could fix my HomePods to my Ikea Fjällbo under my television and have a better stereo setup.

The stand is fixed with 4 M3 screws. The spacing of the screws is adapted for my Fjällbo (but yours shouldn't be too different). You also need M3 washers and nuts for the inside of the Fjällbo.

I also made a wall version so you can fix it with universal screws of 5mm diameter. This version is a bit wider so the HomePod doesn't touch the wall and there is space for the cable. (I have not tested this version.)


Print Settings:

PLA

20% infill 

2 walls

0.6mm nozzle 

I printed it upside down (HomePod base on the printing plate) with support. 

 

Tagi