Raspberry Pi 4 With UPS Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is for a Raspberry Pi 4 with an Uninterruptible Power Supply.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I could not find a case for a Raspberry Pi 4 with a UPS hat. The Raspberry Pi 4 typically has a fan which is mounted on top of the case. With this UPS hat on top, the fan had to be mounted on the side. Four stand-offs are required to keep the two boards separated. These require four M2.5 x 25mm screws. The fan is a standard fan for this processor with four mounting holes 24mm x 24mm spacing and requiring four M3 x 10mm screws.
Notice that there is a binary message on the bottom. If you are into computer science you should be able to decode it.