Vertical Solder Spool holder v2_WireGuideRemix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of retro frog's spool holder to have minimal footprint and added a wire guide. Also pin accepts M3 headset insert.
- Ocena
- 3 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 2
- Wyświetlenia
- 274
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Retro frog’s vertical bearing design is really THE best, it's really stable during unwinding and have a minimal look and filament usage. However I have improved on things that I think is crucial to become perfect: 1) reduced the footprint to its bare minimum 2) added a wire guide. 3) Modified the pin to accept M3 heatset insert, but you could also use the original pin from his original model if you prefer self-tapping.
Parts:
-8x22x7 mm bearing (standard skateboard wheel bearing)
-M3 headset insert (optional and any size)
-M3 screw (around 15mm is ok)