Whiteboard pen + eraser holder. Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 form factors to hold whiteboard pens and an eraser. No supports, fusion files included.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I include 3 models here. Goal is clean, minimal and won't trap dust.
I first tried the larger model I provide here with strong magnets on the back to stick to my (metal backed) whiteboard, but the magnets would not hold. The metal is just too thin. I opted to mount to the wall with VHB tape, but I needed to break the design into 2 narrower models as pictured.
I provide all models. I imagine most people interested in this design would want the single model which holds pens and an eraser together.
The hole for the eraser measures 3"x1.5" (76mm x 38mm). Pen holes are 11mm which are just large enough for the narrow expo markers pictured. You may have to file them down a little if your printer isn't tuned well for bridging, but you want a snug fit so the pens stay upright.
STEP and Fusion360 files included so you can customize. No supports are needed. Print on the side.