Whiteboard pen + eraser holder. Wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 form factors to hold whiteboard pens and an eraser. No supports, fusion files included.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I include 3 models here. Goal is clean, minimal and won't trap dust.
I first tried the larger model I provide here with strong magnets on the back to stick to my (metal backed) whiteboard, but the magnets would not hold. The metal is just too thin. I opted to mount to the wall with VHB tape, but I needed to break the design into 2 narrower models as pictured.
I provide all models. I imagine most people interested in this design would want the single model which holds pens and an eraser together.
The hole for the eraser measures 3"x1.5" (76mm x 38mm). Pen holes are 11mm which are just large enough for the narrow expo markers pictured. You may have to file them down a little if your printer isn't tuned well for bridging, but you want a snug fit so the pens stay upright.
STEP and Fusion360 files included so you can customize. No supports are needed. Print on the side.