1 / 6
OEM mechanical keyboard foot (antislip) ZET GAMING — zdjęcie 1
1 / 6

OEM mechanical keyboard foot (antislip) ZET GAMING

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Legs for cheap Chinese OEM mechanical keyboards Two versions, with anti-slip tip and one-piece

Ocena
5 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
83
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

A copy of the original ZETGAMING BLADE keyboard leg

It should be suitable for all keyboards from this manufacturer and possibly for other brands with the same cases.

I have attached two files, one is a cast leg made of the same material, but it is quite slippery. The second version consists of 2 parts, I printed the base from PETG, the tip from TPU a95. Slightly more slippery than the original rubber pad, but it works well in my case.

 

I printed on an ender 3V2 + sprite extruder with slicer settings:

  • 3 perimeters
  • Layer height 0.16
  • Filling 25% cross grid
  • Support - in a couple of places, minimal

 

The foot fits like a factory one, it is fixed, does not protrude beyond the body, clicks

If you are printing a tpu tip, take into account the shrinkage of the material. A properly printed tip is fixed to the foot without additional materials, but I would still recommend adding a drop of glue.

Tagi