1 / 2
Voron legacy shorter X Carriage with klicky NG — zdjęcie 1
1 / 2

Voron legacy shorter X Carriage with klicky NG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

voron legacy gantry shortened with built in klicky probe mount

Ocena
5 / 5
Polubienia
17
Pobrania
94
Wydruki
0
Wyświetlenia
651
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

the voron legacy gantry is unecessarly long when not using the stock probe. this shortens the gantry by 14.85mm (which is a lot !) and include a built in klicky NG. 

this makes the center of mass closer to the linear rods making the printer much stiffer, improving print quality

 

history behing it:

I built an unecessarly big voron legacy. mine is 310x310x200 build volume, and the long linear rods would bent more than I was confortable, which resulted in slower print speeds and not that great print quality. this mod + using a ligher carriage (dragon burner) resulted in much better and consisted print speeds and print quality on such a larger printer.

Tagi