Accessories for Mitsutomo Tool Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These tool holders can be used if you have a wall plate with 6*6mm holes in a matrix of 18.5mm
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I have made some new tool holders to my Mitsutomo steel wall, as replacement and addition to the original supplied holders. In Denmark available at “Harald Nyborg”
Contains:
A big screwdriver holder with 34 tool holes and option for adding a Calliper holder. See more here: https://www.printables.com/model/141727-caliper-holder
There is four variants of this design:
The original:
Big screwdriver holder V1 (with Calliper bracket)
Big screwdriver holder V1-1 (without Calliper bracket)
New design: with some bigger holes:
Big screwdriver holder V2 (with Calliper bracket)
Big screwdriver holder V2-1 (without Calliper bracket)
A small screwdriver holder with 6 tool holes
A Holder for tree tools
A Pliers holder
A Lock tap, to lock a holder at is position on the wall. Add a lock in each end:
Instructions:
Print orientation: Print with top surface down on the bed!
Support: No support
Material: PLA, ABS, PETG etc.
Nozzle size: 0.4-0.6mm
Walls: 3
Layer height: 0.2-0.3mm
Infill: 15%
Parts required for assembly of Calliper holder:
Two M3 heat inserts
Two M3*6mm, countersunk screws