Accessories for Mitsutomo Tool Wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These tool holders can be used if you have a wall plate with 6*6mm holes in a matrix of 18.5mm
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I have made some new tool holders to my Mitsutomo steel wall, as replacement and addition to the original supplied holders. In Denmark available at “Harald Nyborg”
Contains:
A big screwdriver holder with 34 tool holes and option for adding a Calliper holder. See more here: https://www.printables.com/model/141727-caliper-holder
There is four variants of this design:
The original:
Big screwdriver holder V1 (with Calliper bracket)
Big screwdriver holder V1-1 (without Calliper bracket)
New design: with some bigger holes:
Big screwdriver holder V2 (with Calliper bracket)
Big screwdriver holder V2-1 (without Calliper bracket)
A small screwdriver holder with 6 tool holes
A Holder for tree tools
A Pliers holder
A Lock tap, to lock a holder at is position on the wall. Add a lock in each end:
Instructions:
Print orientation: Print with top surface down on the bed!
Support: No support
Material: PLA, ABS, PETG etc.
Nozzle size: 0.4-0.6mm
Walls: 3
Layer height: 0.2-0.3mm
Infill: 15%
Parts required for assembly of Calliper holder:
Two M3 heat inserts
Two M3*6mm, countersunk screws