Robot Signal Light (RSL) 1-inch mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robot Signal Light (RSL) holder for First Robotics (FRC), to mount into 1-inch spaced #10 bolt holes (no other hardware)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Robot Signal Light (RSL) holder for First Robotics (FRC), to mount into 1-inch spaced #10 bolt holes (2x1). No other hardware needed, both models use the geometry of the RSL itself with at least a partial press fit to affix them them to the mounting bracket.
- No supports needed
- Use optimal settings for printer, the models in the image use 0.16mm layer height with a 0.4mm nozzle
rsl-mount-screw: (ideal) uses the screw threads to keep the RSL on the mounting bracket
rsl-mount-plug: (not recommended) uses the plug to keep the RSL on the mounting bracket. This is less secure than the screw mount, but if you cannot remove the screw back of the RSL this model will work for you!