1 / 1
Power tool adapter for Mokalov hand crank coffee grinder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Operate a Mokalov coffee grinder using your favorite power tool
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This adapter sits right on top of the normally assembled Mokalov coffee grinder so the crank can be turned using a power tool with a hexagonal bit rather than by hand.
A lot of force is exerted on a very small surface, so most common printing materials like PLA or PETG break before a full load of coffee beans has been ground. For a successful print, I used:
- PA6-GF (glass-fiber reinforced Nylon) filament.
- Brim to counter warping.
- Sufficient infill ratio to make sure the top portion where the adapter interfaces with the drill bit is solid.