gridfinity bin adapter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 1x2 gridfinity bin for various adapters
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity bin adapter holder
1/2" ratchet to standard hex bit adapter
1/2" socket to allen key 11/16" (17mm) adapter.
1/4" socket to allen key 1/2" (13mm) adapter.
The adapter holder uses a gridfinity 1x2 bin.
Print standing with 10% grid/gyroid infill and no support.
You can hang it on a peg board or wall with this modula gridfinity 2x2 holder.
(I do realize that this is not something every human needs, but since I've “caded” it I might as well upload it)
MODULA - a module based tool holder system
The idea is a adapter plate (metric/imperial/plain) that attaches to peg board/wall, then a module snaps on to this adapter with dovetails.
Why use an adapter? Everyone can share the modules worldwide, and just adjust the adapter plate for their environment.
This module attaches to the adapater biltema or the vanilla adapter available here on Printables. The vanilla adapter can be modified so it fits wherever You need to hang these modules.
