1 / 4
Fan Enclosure for Biltema 100mm fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan Enclosure for Biltema 87-3860 100mm fan, replacing original fan case.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
Replacement enclosure for Biltema 873860 bathroom/kitchen/general fan for 100mm tube.
Reuse motor, fan and screws from original.
Prints without support.
Post process:
The holes in the main part for motor mount and motor wires are covered by one thin layer to make the model print without use of support.
Clear the holes with a drill or a sharp knife to make the holes accessible.
See photos for assembly.
>> If you like the model, please leave a like, rating or a make… ;-)