Strong holder for mounting stand / Starker Halter für Arbeitsbock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a strong holder for a mounting stand. Drop them e.g. into the garage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I need my mounting stands not every day. It is possible to fold the together. But having 4 of them will need some space, even if they are folded. Therefore I've build these holders to drop them on the wall in my garage. Turned out pretty well.
I've printed mine in PLA (they are in the garage). PETG would be an other option.
Print them with standard settings:
- 0,4 mm nozzle
- 25% infill (lines)
- no support
The holes are designed for 3 mm screws. Due to the fact that I had only 4mm available I've drilled the holes to 4mm - no problem.
If you like these holders then download them and don't forget to give me a like.
Any makes are welcome.