VACUUM HOSE HANGER (DOUBLE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A double hose hook to suit vacuum hose up to 50mm (2inch) for house or workshop.
- Ocena
- 4,944 / 5
- Polubienia
- 473
- Pobrania
- 1822
- Wydruki
- 21
- Wyświetlenia
- 5559
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple (but quite long) print to hang any vacuum hose up to two inches (50mm) diameter and two loops.
My hose is extra long (6m) so needed two loops to keep it tidy and off the ground.
Printed in PLA, but anything will do - does not even have to be particularly sturdy. Mine is mounted on a piece of ply to make it easier for me to bolt to the concrete wall, but that is not necessary for that or any other installation!
Print as shown below with no support necessary. (STL updated)
This is just one of a growing collection of vacuum hose fittings and accessories that can be found in my VACUUM AND SHOPVAC ACCESSORIES COLLECTION
