Wire whisker cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wire covering with flexible center whiskers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Another need it make situation.
A wiring cover for a recent car audio install I was working on.
The cover measures 7in x 2.5in OD and 6in x 1.5 in ID.
I used this to cover a dual run of 1/0ga power wire into an amp rack, giving it a little neater appearance than just a drilled hole.
The cover was printed from PETG+ with 3 vertical wall, 3 bottom, and 3 top layers.
Infill was 15%.
The whisker was printed from TPU with 3 vertical walls, 3 bottom and 3 top layers.
Infill was 15%
You will need to print two of the whisker files for one cover.
Use #6 screws for mounting to surface of rack.
Hope it helps someone.