Wire whisker cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wire covering with flexible center whiskers
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Another need it make situation.
A wiring cover for a recent car audio install I was working on.
The cover measures 7in x 2.5in OD and 6in x 1.5 in ID.
I used this to cover a dual run of 1/0ga power wire into an amp rack, giving it a little neater appearance than just a drilled hole.
The cover was printed from PETG+ with 3 vertical wall, 3 bottom, and 3 top layers.
Infill was 15%.
The whisker was printed from TPU with 3 vertical walls, 3 bottom and 3 top layers.
Infill was 15%
You will need to print two of the whisker files for one cover.
Use #6 screws for mounting to surface of rack.
Hope it helps someone.