4D 50% Chance Dice For the Royal Game of UR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This dice is inspired by the Royal Game of Ur. It acts as a standard D4, while also acting as coin.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
This D4 has two colored tips allowing it to produce values between 1-4 OR 0-1.
This is a multi-color print. Multi-material if you use my custom support.
0.4mm Nozzle or smaller
0.2mm Height or smaller
infill 100% on dice, 0% on custom supports
Perimeters 2 on dice, 1 on custom supports
Recommended PETG for the dice, PLA for the custom supports for best result. MAKE SURE the support faces are flat to the build plate, and the dice edge (not face or tip) is also on the build plate. Also recommended both PETG and PLA be same color in case of bleed over.