1 / 3
4D 50% Chance Dice For the Royal Game of UR — image 1
1 / 3

4D 50% Chance Dice For the Royal Game of UR

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This dice is inspired by the Royal Game of Ur. It acts as a standard D4, while also acting as coin.

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
174
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Public Domain

This D4 has two colored tips allowing it to produce values between 1-4 OR 0-1. 

This is a multi-color print. Multi-material if you use my custom support.

0.4mm Nozzle or smaller

0.2mm Height or smaller

infill 100% on dice, 0% on custom supports

Perimeters 2 on dice, 1 on custom supports

 

Recommended PETG for the dice, PLA for the custom supports for best result. MAKE SURE the support faces are flat to the build plate, and the dice edge (not face or tip) is also on the build plate. Also recommended both PETG and PLA be same color in case of bleed over.