1 / 6
GarageBoss GB125/GB150 Oil Drain Pan Height Extension and Pouring Spout — zdjęcie 1
1 / 6

GarageBoss GB125/GB150 Oil Drain Pan Height Extension and Pouring Spout

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of a roughly 4"/100mm extension for the GarageBoss 12.5 quart oil drain pan so it prints with no supports.

Ocena
0 / 5
Polubienia
0
Pobrania
32
Wydruki
0
Wyświetlenia
299
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Extension for GB125 Reacher oil pan so that the oil catch is higher (replicates a part no longer included with the pan). This part is a remix; the original part matched the custom threads of the oil pan perfectly but required supports. This part can also be used as a spout to help pour the oil out and can be stored in place using the caps that come with the pan on either port (as shown in the pictures). For this reason I didn't print the cap of the model I remixed.

I used 100% infill when printing this for additional strength and so that oil is less likely to seep through the walls. Using concentric pattern infill for all layers helped speed up the print significantly.

 

Notes on changes in this remix:

I flipped the threads vertically on the female end so that they print more easily in the desired print orientation (male end on the bed - it should import this way in Prusaslicer). In this orientation, the model doesn't require any supports at 0.2mm layer height, however I do recommend a brim so that the print stays fixed to the bed. The threads fit great!

The thicker wall of this model doesn't add any external size. The inside diameter is still larger than both the catching pan and the outlet port, so it shouldn't be a flow restriction. 

The trimmed ends of this model give more surface area on the bed when printing and reduce the need for supports. Additionally they allow the model to bottom out on the sealing surface of the oil catch pan rather than the base of the threads, preventing oil from getting in the threads when installed.

Tagi