PTFE 360 Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE 360 Connector
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
PTFE tube connector - head capable of rotating 360 degrees (printed in place) - entire connector can be affixed to the printer enclosure.
I created few versions
PTFE_Connector_M6_Compres - you can screw PC4-M6 pneumatic quick release connectors on both sides
PTFE_Connector_M6_Compres__PTFE - PC4-M6 pneumatic quick release connectors and insert just PTFE tube on other side
PTFE_Connector_M10 - thread for PC4-M10 pneumatic quick release connector
PTFE_Connector_Straight_Through - push in PTFE tube
PTFE_Connector_M3 - thread for PC4-M3 pneumatic quick release connector
Printing:
Support: no support
Layer height: 0.2
Perimeters: 4
Layers numbers: 4 for top and bottom
Infill: 30%
It is printed in place. After printing the model, simply rotate it to break the initial bond (apply some force to break it). Once done, it will move fairly easily.