Little 2 pieces leg/ Pata pequeña en dos piezas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple leg, 22cm tall, but divided into 2 pieces with T10x2 screw. That makes it printable on every 3dprinter, and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple leg, 22cm tall, but divided into 2 pieces with T10x2 screw. That makes it printable on every 3dprinter, and also adjustable to level. I have printed it on petg, 10% infill.
Una sencilla pata de 22cm, pero dividida en 2 piezas con una rosca T10x2. Esto la hace imprimible en cualquier impresora 3d, y ademas permite ajustar para nivelar. Yo la he impreso en PETG, con relleno del 10%
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega
0.16
Infill:
10
Notes:
Printed at 0.2 height, except screw and nut, at 0.16. Recommended make a "heavy zone" around screw, with 100% infill.
Impreso a altura 0.2, excepto el tornillo y tuerca, a 0.16. Recomendado hacer una "zona reforzada) alrededor del tornillo, con relleno del 100%.
Category: Household