Liczymy pasujące modele…
Brr. Brr. Patapim, my hat is full of Slim. In the dense and mysterious forest, Lived a being most curious. With tangled roots and crossed legs, Thin hands and waving arms, His nose as long as a ham, A bit like a baboon, a bit like a bush.…
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
I looked at a lot of frame reviews and tried to incorporate many design features that I liked into one drone frame. I recommend test printing it to see if your components will fit first as it is a fairly tight build. If slicing use the…
Lowered down fan so the heat sock can fit in without pressing against the fan duct (does require some support for a decent print, I recommend using tree supports and using them on baseplate only, this is up to you though) Original:…
PROTESIS PARA PERROS AYUDANTE DE MOVILIDAD REDUCIDA CON TENSORES ELASTICOS
Just another poop bag container that works with the Flexi retractable leash's. I've been a big fan of these brand / type leash's for years, they take so much abuse & just keep on working. This design should be wide enough to fit the…
3 modelos de patas para videoconsola PS4, se puede descargar para l PS4 slim, PS4 pro y PS4 FAT.
Dobrý den, Mám pro vás lopatu pro RC auto, jeep, expedici. Lopata ma zvlast kovove časti, pro vetši realističnost. Lopata je ze třech kusu!!! Pokud vás moje práce zaujala, odkazy jsou zde: https://www.instagram.com/ainon3dprint/…
Patas para elevar la PS4 y mejorar la refrigeración de la PlayStation 4
Prótesis escalable para nuestras mascota . Es recomendable imprimirlo con materiales resistentes
This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets. Hanger Hook I printed these standing up on their bottom end with a raft just to be on the safe side. This hanger…
A remix to add compatibility to my Mk4 Improved Cooling Duct "S" Version.
I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…
Llavero con forma de pata de perro
🥔 Célèbre, moustachu et toujours décalé : Monsieur Patate débarque en 3D ! Ce modèle fidèle au célèbre personnage de Toy Story représente Monsieur Patate dans toute sa gloire : chapeau melon, grande moustache et chaussures bleues. Une…
If you have a Patagonia jacket with a missing or broken zipper tooth, this replacement part allows you to restore functionality without replacing the entire zipper. Designed to be a precise fit for YKK zippers commonly used in Patagonia…
Compatable with the real threadboards made by 3d print acadamy launched on kickstarter 0.2 layer height 3 walls 15% infill
He creado este diseño para que puedas unir de forma simple unas patas de 50x50mm y de 40x40mm de madera o de metal a un tablero de 19mm o superior con tornillos de 3,5x20mm. Las dimensiones de la mesa, banco, taburete, peldaño o lo que…
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
Support legs for furniture or shelves 100 mm high (PETG). Patas de soporte para muebles o estantes de 100 mm de altura (PETG).
Llavero Impreso en PLA, diseñado para hacer cambio de color manual. El modelo es una clásica calcomanía que representa a la emblemática ruta 40 teniendo paso por San Martín de los Andes, Patagonia Argentina. Tiene un agujero de 2mm para…
Tapón de protección para evitar el roce de las patas de una silla con el suelo. Pieza hecha en freecad parametrizada con hoja de cálculo para poder adaptarla a las medidas necesarias de la pata de la silla.
Pata y tornillo compatible de los muebles de baño IKEA Fullen. No tiene regulación de altura pero tiene el tamaño correcto, se puede poner junto a las originales regulando la altura de las originales.
Protección para la pata de las mesas Ikea Lack, cualquier modelo de mesa, no solo las cuadradas, también las rectangulares mas grandes llevan la misma medida de patas, preferiblemente hacedla en un material duro, ASA o ABS, con suficiente…
Patas para subir 4-5 cm la mesa de escritorio MICKE de ikea, **06282023 – add new legs with 125.2 lenght .
Voici un adaptateur pour les gens qui ont 2 types de télépéage ( Pro / perso) Fonctionne avec Ulys de Vinci et Total par exemple. A imprimer en PETG 30% de remplissage
zapata de flash o micro, etc para cámara. Print instructions Unassociated tags: flash adapter Category: Camera Summary zapata de flash o micro, etc para cámara. Print Settings Printer: ANYCUBIC I3 MEGA Rafts: Doesn't Matter Supports:…
I have a Patagonia running vest. It came with two HydraPak water packs. Drying them is a bit tricky because they collapse so easily. Therefore, I designed a drying rack. It holds the bottle upright so that it can dry. Has an additional…
Table leg extensions. For legs no wider than 40.5 mm. Specifically designed for the following product. https://www.amazon.es/gp/product/B076P6XP2T/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 This model can be installed with and…
These are some brick tiles I did for some buildings I made that are made using the Linka plaster moulded tiles. These tiles are compatible with the original Linka tiles in that they are the same dimensions and interlock with the fingers…
After finding TightTieFighterFight's base templates and printing their Cal Kestis saber, I knew I wanted more, and I knew I shouldn't… So I decided to fire up Fusion and whip up a Vader saber! This one is more based on his ESB saber and…
A 3D print designed to be mounted on top of a lazy susan or can be mounted directly to the spinning hardware turning the disk into the spinner. It is primarily designed for Quacks of Quedlinburg but can be used for a variety of different…
A set of tech deck ramps modeled off the ones included inside Tech Deck skatepark sets. The colllection includes: 1x1 Quarter pipe vert ramp 1x1 Bank ramp 1x1 Convex ramp 1x1 Wall panel - MORE TO COME- You may find some issues with the…
Es la pata para enganchar el coso de las fichas Print Settings Printer Brand: Hellbot Printer: Hellbot Magna 2 230 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 10 Category: Toy & Game Accessories
Legs for the IKEA dresser of the KULLEN model, consists of a set of 6 legs, Ø5 wood screw is needed. (Patas para la cómoda de IKEA del modelo KULLEN, consta de un juego de 6 patas , se necesita tornillo madera Ø5.)
No support is required for printing. 0.2 mm layer with 0.4 nozzle. This female Huemul (Patagonian female deer) Woggle Scarf Ring is intended for Guides leaders affiliated with the WAGGGS association. The owner of this woggle loves Huemuls…
Farm Animals - Exotic - Patagonian Maras 3D printable model.
Patamon Digimon Creature Model
Mantiene las cartas secas en el buzón ya que se acumula agua cuando llueve. Puede servir de soporte para cualquier cosa.
Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…
Přítelkyně mě požádala o lopatku pro dávkování krmení jejím milovaným hlodavcům a tak mne napadl, když se blíží ten Valentýn, tento motiv. My girlfried asked me for a feeding shovel she could feed her beloved pets with and because is the…
This version is much more stable.
Simple round container with the Patagonia logo for storing stuff. **For personal use only. I do no own the logo so please respect any copyright regarding the Patagonia logo. Thank you!
Protector diseñado para patas de silla cuadradas de 20x20 mm. Su función es proteger tanto la pata como el suelo, evitando marcas, rayones y desgaste por el movimiento diario de la silla. Además, ayuda a reducir el ruido al desplazarla,…
3DTouch ( https://aliexpi.com/EWr7 ) mount for a Mellow BMG Wind extruder ( https://aliexpi.com/twlM ) Both normal and volcano compatable, for volcano mount your BLTouch from the bottom and from the top for normal E3DV6 (see photos) To…
I lost one of the clips for the sternum straps for my Patagonia backpack that I use everyday. I created the adjustable, detachable sliding clip and then created this 3d printable clip that works with the female clips on the backpack. The…
Un robot basico que solamente necesita un bateria y un motoreductor y 4 rodamiendos de 22mm para poder funcionar, es div
Patas para nivelar impresora ET4/ET5 en superficies irregulares Print Settings Printer: Anet ET5 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: GST3D PLA Negro Category: 3D Printer Parts
Patas para las escaleras tipicas de pintar, que siempre estan rotas, si el suelo es resbaladizo, se recomienda hacerlo en material BOUN, o un semiflexible duro , quizas tambien en petg , . el perfil de la escalera debe de ser de 40x20.
3D scan of the combination oil filter socket/wrench that I had lying around. The socket has a 1/2 inch drive and is compatible with Toyota and Kawasaki oil filters. Do not use with a 3/8 drive reduction if you are trying to remove an oil…
I love my Patagonia computer backpack which is over 10 years old. Patagonia is great about repairing things and when I lost the one of the sternum strap sides 5 years ago, they sent me a free set. When I lost another one recently,…
patas para la sapphire plus , aumenta el hueco de abajo hacerlas en material tipo boun o con pocas capas para que no sean rigidas.
I had a bunch of filament left over from my Robox Printers and wanted to use it on my Bambu with the AMS. Print two of these on the strong infill setting (25% infill) and they snap right on each side of the Robox reels
Patas para silla da campamento
Diseño para proteger ante arañazos la pata del xiaomi m365 pro. Imprimir preferiblemente con filamento flexible.
I've had 370 sized motors hanging around for ages waiting to be put into a blaster but I never quite found the right one to put them in. Some 370 motors are pretty powerful and would serve as good alternatives to some of the hobby grade…
Es la base de soporte para un macetero de 25 cm de base. No encontraba ninguno que me gustara y fuese lo bastante alto. Con un cesto de yute (cuerda) y unas patas compradas en amazon (desde 8 a 42 cm de alto) construí este bonito…
Scarfring or neckerchief based in a patagonian mara. Pasa pañuelos de mara, liebre patagónica
Leupold VX Freedom 4-12x40 compatible glare shield. Fits snugly, use round elastic to hold it in place by looping around the top turret.
Patas para sobre de escritorio para dos monitores.
Ma belle mère souhaitait une pataugeoire pour ces tortues de terre pour qu'elles puissent se rincer les pattes . J'ai créé ce modèle avec des petits picots pour éviter que ca glisse Je l'ai imprimé en ABS car la pataugeoire va rester…
Wanting to give your balls a boost? Introducing the ball kicker for the Hubelino ball system! Note: Tested with 24mm plastic marble and 3D printed Hubelino parts. Any feedback would be appreciated.
I needed a connector to connect the Revopoint scanner to the stabilizer. I made it thinking about being able to continue using the front cover designed by Jason Walker. Printed in PLA black mate Esun without suports
To do the model, you must use this link (https://www.thingiverse.com/thing:1200206) to get things started (Recommend printing in gold like I did in the photo). And the frame needs to be black so its fitting!
[ English ] 3D model of the Bestway® leg cap replacement , designed to fit the bottom of the vertical frame tube. Ideal for replacing broken or missing parts. Compatible with metal frame above ground pools. Ready for 3D printing. […
Patas para adiador de pared. Para poder usarlo sin instalación
El modelo esta hecho para la Play 4 slim 500gb, lo he impreso en PETG con un relleno del 5% y dos paredes, aunque recomiendo imprimirlo con un poco mas de relleno, imagino que en PLA también aguantara bien. Si en las fotos veis la pared…
Estas patas para sofá están diseñadas para elevar y modernizar tu mueble, ofreciendo mayor altura, comodidad y estilo, son fáciles de instalar y brindan estabilidad. Ideales para renovar el diseño de tu sofá o facilitar la limpieza del…
This special type of slide dips your marble from one height to another in a special way. Thanks to the help of gravity! Any feedback would be appreciated!
Suplemento para mesa con patas cuadradas, realizado en PLA madera.
THIS PROJECT HAS SOME RISK AS IT REQUIRES SLIGHT MODIFICATION OF THE NH-SB TOOLHEAD BOARD (BENDING PINS). Consider before continuing that you might ruin your toolhead board. This is exclusively for people building Dragonburners using E3D…
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Antes de imprimirlas considera la idea de que el stl con nombre de goma va impreso en tpu y el resto en pla, también necesitaras espejear el stl que lleva por nombre pata
Sigo dándole soluciones a mis amigos. En este caso las patitas del teclado que siempre se rompen. Para mejorar la posición de escritura le imprimí dos patas nuevas de reemplazo. Las hice en PLA relleno 100%.
This is a LEGO compatible stove for your LEGO creations or mocs, I printed this on a Bambu X1C at the 0.08 layer Hight profile in Bambu Studio, but you might be able to get away with a 0.12 layer Hight (Might be a tight fit) I printed…
Replacement buckle (male part only) for chest strap on Patagonia Black Hole 32l backpack The original male part broke, while the female part held on and strap was sawn in. So I decided to exactly replicate the male part instead. In the…
A mi hermano se le rompió la base de una pata de su trípode Neewer y pues tras unos minutos de diseño está lista, además me recordé que hay un concurso sobre partes de reparación de objetos y pues lo comparto de una vez (a pocas horas de…
Aumenta la altura del mueble PINNING de ikea, para que pueda pasar el robot aspirador por debajo.
Pata para altavoz Logitech Labtec Pulse 375
I remixed this lovely looking 3-record hanger so I could print it on my wee A1 mini. I have removed the middle rack and boolean merged the top and bottom. Handy if you need a smaller one, but should now fit onto most “mini” build plates…
Created this sandpaper holder for my 3 inch Milwaukee sanders. It holds about 20 disks for each grit. There is an extra space that I created to hold the interface pads and the two hex keys. easily fits in the Milwaukee pack out drawers…
Check it out, we've got a Huemul (that's a Patagonian female deer, in case you didn't know) badge ready to be sewn on. This badge is perfect for all you Scouts and Guides out there who've adopted Huemul as your totem name. I've got two…
Ce modèle est conçu pour connecté un scie a onglet metabo KGSC 216 A mon aspirateur. Il a été imprimé avec du TPU, ce qu
Replacement for the (quite flimsy) Innobo keyboard original 25 mm foot. It's a remix from https://www.thingiverse.com/thing:4278608 Reemplazo para la pata original de 25 mm (bastante endeble) de un teclado Innobo. Es un remix de…
A holder that can hold 2 Blistex original chapsticks
I modeled the holder for my wel-bilt screwdrivers… Phillips and Flat. It is pegboard compatible or screw it to a wall. Enjoy! https://www.northerntool.com/shop/tools/product_200579893_200579893…
Refuerzo patas mesa lack. También se puede utilizar para otras mesas.
Table lift supports. I made this for IKEA LAGKAPTEN / TILLSLAG . I needed a little high. You could adapt to another size. Nice to help you!
Designed as to keep the device safe and easy to mount to small stands for testing projects and boards where access is limited, The case is designed to be 3 Lego bricks wide and 1 tall, so can easily be built around if you need to enclose…
Pata mesa enroscable
Diseño simple de patas para la mesa de ikea VIHALS. Diseñada en autodesk fusion 360 tomando de referencia los separadores que trae la mesa para poner con las ruedas.
Patagonia brand keychain multicolor double face 🏔
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/3SJ2AlOpKFu Category: 3D Printing
hice estas patas porque se me rompió la de mi teclado y como tener una de un color y otra de otro no me gustaba decidí hacer dos.
