1 / 2
Toyota and Kawasaki Compatale Oil Filter Socket (64-65mm)(1/2 Inch)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D scan of Toyota and Kawasaki Compatale Oil Filter Socket (64-65mm) with a half inch 1/2 drive
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
3D scan of the combination oil filter socket/wrench that I had lying around. The socket has a 1/2 inch drive and is compatible with Toyota and Kawasaki oil filters. Do not use with a 3/8 drive reduction if you are trying to remove an oil filter from your motorcycle, as it will most likely not fit and smack into the exhaust. The model is probably fit for 3d printing if your filter was not installed by a ******.
The model was scanned with my Metro X scanner.
