Liczymy pasujące modele…
Hi everyone. I share here my solution to provide some wind protection for the Kawasaki Z750S. As you may have already found out if you arrive here, getting handguards it's difficult, most of them don't fit properly. And if you are like me…
Wydruk około 8,81 €–10,77 € nettoWstępna wycena jednego wariantu
Wall Art Silhouette model of the Kawasaki Ninja 250R 2008 superbike. Adjustable size. I accept model suggestions.
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
Kawasaki Ninja ZX-6R Superbike Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu
Habe lange darauf gewartet das jemand eine Kawasaki Ninja H2R als Wall Art Design macht jetzt habe ich es selber gemacht
Wydruk około 2,91 €–3,55 € nettoWstępna wycena jednego wariantu
Llavero personalizado de una kawasaki vulcan 650
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
it's a replica of the kawasaki klr 650 turn signal shell, with support in the printing process and 40% fill, pla+. I suggest to adapt the gcode to your printer. My print has a lot of small bridges(maybe the no-load movement speed it's a…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
Kawasaki keychain, with a simple and easy design for a quick impression and low material cost.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
Kawasaki Ninja brand keychain, with a simple and easy design for a quick impression and low material cost.
Make oil changes less messy on the Kawasaki ZX6R 636. You can easily remove the filter with funnel in place.
I wanted to replace the stock turn signals on my Kawasaki Vulcan S 650. However, the Kawasaki turn signals are mounted with a different kind of turn signal attachment, and the rear ones have this rubber mount. There are people who drill…
CAD model built in Onshape. Total height 21mm. Printing instructions: 0.2mm layer height PETG preferred material, although PLA works fine. I actually printed a full PLA rivet and it still holds perfectly fine after 3 months in place on my…
Kawasaki Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
As a reference I used a picture of the original logo Setting as desired I print by standard with Nozzle: 0.4 Resolution: 0.2 mm Infill: 20 - 100% Support: not necessary PLA
can be printed together the model needs to be glued together or separately in other colours can be printed without support the Starfighter is very realistic Print in place kit card , Assembly required
Ich habe hier einen Schlüsselanhänger für Kawasaki Fans entworfen. Die Anhänger können in verschiedenen Farben gedruckt werden. Die Schlüsselanhänger können schnell und einfach gedruckt werden. kein Support Layerhöhe 0,2mm verschiedene…
I modeled this awhile back to replace the factory tool box on my 1st gen Kawasaki KLR 650. It's best to print it in ABS so that it can withstand sitting in direct sunlight in the middle of the summer. I don't remember the settings I used,…
Printed at speed 3600, 2 outlines, 3 and bottom and a 25% infill. Gives a good sturdy print. Have not tried to scale down you may need to watch scaling and width of outline if you want to try. Or just go back to the tinkercad and make…
A motorcycle kick stand pad for your Kawasaki. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new ZX10R in the dirt. Print this with…
Kawasaki Versys keychain, with a simple and easy design for a quick impression and low material cost.
I designed some caps to cover the holes on the sides of the frame of my Kawasaki Z900 RS. The logo itself is not my design. The caps feature three places to easily remove them, even without tools. They might fit other motorcycles as well,…
Assemble your own rolling motorcycle, inspired by the legendary Kawasaki Ninja 500 (500R/EX500/GPZ500)! The model prints in one piece, and components are snapped off the frame. No Support Required! Fits A1 Mini; 178mm*178mm*16.5mm [An…
Hi, this is a HueForge / Filamentpainting of a Kawasaki Ninja. Start with Black At layer #5 (0.48mm) swap to White At layer #11 (0.96mm) swap to Green At layer #15 (1.28mm) swap to White for the rest. Enjoy printing and follow me! View my…
Kawasaki Ninja Sign 6" Wide 8" Tall
A Kawasaki motorcycle company logo keychain. Please find attached a pre-painted file .3mf file for bambu printers and a .stl file for you to slice yourself.
Hi I would like to introduce my Kawasaki SX 650 Jetski Car Load System. It was born out of the need that I don't have room for a Jetski trailer. So the SX 650 had to be in my VW Touran. I was inspired by the loading system of a wreck…
Ich wollte meine Blinker Vorne an meiner Z900 SE umbauen und habe im Internet Adapter dazu bestellt. Diese haben mir erstens gar nicht gefallen bezüglich ihrer Oberfläche, ausserdem hatte ich die Falschen bestellt die gar nicht passten.…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles Kirby inspired, Chef Kawasaki, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Just a Keychain for a Kawasaki Z650. Print Settings Printer: BambuLab X1C Rafts: No Supports: No Resolution: 0.16mm Infill: 50% Filament: 3DJake Category: Keychains
LLAVERO CON FORMA DE LLAVE KAWASAKI IMPRIMIBLE EN DOS COLORES CON UN SOLO EXTRUSOR
Kawasaki Z650 (2020) turn signal adapters The available after market adapters did not fit (pictured). Remix of https://www.thingiverse.com/thing:3535096 Category: Vehicles
Keychain / Pendant made with the Old Kawasaki Logo
Kawasaki brand keychain, with a simple and easy design for a quick impression and low material cost.
First two pictures show this modell. Last picture shows original rubber cover of left side. The modell has also a little groove for 2.5 mm sealing ring to better stay in place by its friction.
Brake hose holder for Kawasaki KXF
Um ein besseren Ölwechsel an seiner Kawasaki durch zu führen, habe ich schnell mal 2 Öl Trichter gezeichnet. Diese Passen bei Motoräder mit einem Gewinde von M20x2.5 es sind zwei Varianten 60mm und 100mm Durchmesser. Gedruckt habe ich…
This cup holder has higher sides than others for holding Stanley style cups. Cutout allows for handle of the cup to be set in properly. Hole in bottom allows you to push up smaller items with your finger.
Replacement for the original turn signal. Must be printed in flexible material. I have used TPU95A, and PLA for supports. Printed on Prusa XL.
A remix of the well known Maker World Clock for all KAWASAKI fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection . [UPDATE]:…
Hi I have created 3 conus for the kawasaki jetski series 650 SX & X2. There are 3 different shapes / lengths. The short cone is for freestyle riding. The middle one is the racing cone and the long one is the maximum speed cone. I worked…
The original fuel cap of my edge trimmer broke and the replacement was too expensive so I modeled a new one. Original part number: 51049-2091. Freecad source included.
This is a 3D Printable motorcycle tank cap for a Kawasaki KZ 650 SR tank. The original is expensive and very hard to come by, so I decided to 3d print one instead. Hopefully this could be a template mechanism that can be remixed to suit…
Protector de pies laterales KAWASAKI Z900 - KAWASAKI Z900 Side Foot Protector
Aschenbecher mit Kawasaki Logo ca 62mm im Durchmesser
Portachiavi Kawasaki Ninja bi-colore.
This is a pump shoe replacement for Kawasaki 750/800 Jet Ski hulls. Printed with PETG Print in orientation as downloaded 8 walls 6 bottom shell layers, 7 top shell layers 15% Gyroid infill Still in testing phase but PETG is very similar…
Mit dem Umbau meines alten Motorrades (Kawasaki Z1000 Baujahr 2003) auf Stahlflexleitungen von Spiegler passen die Originalen Bremsleitungshalterung natürlich nicht mehr (Bild 2) Also schnell Neue konstruiert und in PETG gedruckt. Für 6mm…
I recommend using ASA or another temperature-resistant filament with 10% infill + M6-20mm bolts with blue Loctite.
portacenere kawasaki stampabile in 2 colori
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
This is a wheel cap for a Kawasaki Mule FXT-pro. I made if for a 2020, but it will fit many years. Kawasaki wanted $25 a piece, so I guess I outsmarted them. Made it out of black PLA+ at 100% infill. I turned it 90 deg in Cura so it sat…
A switch guard/shroud designed for the dashboard mounted winch switch on the Kawasaki KRX 1000, but can also be used on some of the other dash switches as well. Its purpose is to simply reduce the chance of accidental activation and…
When not riding my motorcycle I had my keys lying everywhere. Now I made a nice cup for my keys and keep my keys in them. And when looking at the cup it is clear what the keys are for. ;-). If you would like a cup for some other brand or…
tisk petg , detail 0,10mm ,nastavení průša , závity potřeba protáhnout ,šroub tisknout zvlášť s límcem.
Oil filter wrench for Kawasaki Z1000 2010 oil filter. Fits for HF303 Hiflow and original Kawasaki oil filter. Ratchet 1/2in. Category: Hand Tools
This custom 3D-printed adapter is designed specifically for installing H7 LED light bulbs onto a Kawasaki Z800 motorcycle. The adapter allows for a secure and straightforward installation process by accommodating the removable plastic…
Print with 0.2 nozzle to get the best result, or try to scale it for 0.4 nozzle
ZX4R/RR ZX25R 3D printable wall art. Lines are not perfect as it is hand drawn. About 3 passes thick on a 0.4mm nozzle
I got a GIVI tank bag from a pal for a couple of quid, problem was he'd thrown out the flange (suppose that didn't matter as it wouldn't of fit my bike anyway!) and unfortunately the plastic GIVI tank mount I think original part…
All four turn signals on my 2002 Kawasaki VN1500 Vulcan Classic Fi were in a sorry state - you can see one of them in the photos. I know from previous experience that replacements for these are in the $50 a piece price range. Believe me.…
Install it based on my second photo. Original footpeg bolts will work. If you decide to print it, I'd greatly appreciate if you posted your make. Happy printing.
This fender eliminator fits Kawasaki zH2. The OEM plate light mounts with original hardware. There are no turn signals holes. This fender eliminator may fit other models but it has not been tested.
A spare part for my friend's Kawasaki JS550 that fits the original lid, tube, and chain. Compared to the original part, this one has a slightly angled tube to make the fuel hose bend to be less extreme, at the request of my friend. As…
My son recently bought a very low time 2019 Kawasaki Z650. When we went to do the first oil change and remove the factory installed filter it was very difficult to remove( I think it was installed dry). My cheap set of cast aluminum oil…
This is a blinker cover for the Kawasaki er6 2012 to be able to mount after-market blinkers. I have no clue if that can fit other Kawasaki motorbikes. Made on Catia V5 Category: Vehicles
A nav bar suitable for the 1st gen (2007-2009) Kawasaki Versys. There are 3 files. First part is the bracket to create a connection to the existing tower under the windshield. Second part is the bar itself. Third file is the the two parts…
Die Bohrschablone für Rohre bis zu 25mm Durchmesser ist ein nützliches Werkzeug für jeden, der präzise Bohrungen an Rohren durchführen muss. Die Schablone besteht aus einem stabilen PETG rahmen, der speziell für die Aufnahme von Rohren…
This is a keychain with the Kawasaki ninja 400 logo. If you don't have a multicolor printer, you can use the pause technique to pause the printer right before the logo layer starts to print. Cheers.
I printed this tool with 50% fill and it worked great.
This is a copy I made of the kawasaki ninja 300 swingarm cap 11065-0262-18T
This KRX keychain .step file is ready to for go AMS. Change the colors in the ‘objects’ box under Process in Bambu Studio. Those without AMS can print this keychain by adding a pause at layer 16, or 3.2mm, and changing the color manually.…
3D PRINTING SETTINGS Nozzle: 0.4 Material: PETG, ABS, ASA (or any other weather and heat resistant material) Layer hight: 0.2 Infill: 100% Print pieces/indicator (1 for the outside and 1 for the inside)
Not sure what years this will work for, but it's the lanyard clip for my Kawasaki JS550 1989
I recently bought a Beeline navigation device for my motorcycle. The mounting option for my type of motorcycle were either limited location wise, or bulky and ugly otherwise. So I decided to create my own option. In the cockpit attached…
Designed for to delete the rear fender of a 2021 Kawasaki Z125 Pro, I just used some 2 part epoxy to put the 2 pieces together, Re-use stock hardware Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 100%…
A velocity stack made for the ITB of a 2006 Kawasaki ZX6-R 636. For car use. The throat is 55mm with a slite sitting part on the bottom.
Kawasaki self-made keychain Check my Cults3D profile. Thanks for downloading and if you support. Category: Keychains
A simple key chain with the Kawasaki Ninja logo on it.
This model gives you the possibilty to mount a (good) aliexpress bicycle mount on a Kawasaki Z1000 steering block. This block is around the handle bars and therefore the mount cannot be attached directly to the bar itself. There are three…
Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…
Kawasaki CAP DUMMY (11065-0921). I lost one so I made a copy of the other one as buying will be expensive on my country (because shipping). Prints in ~40 minutes, 0.4 nozzle, 0.12 resolution, 35 mm/s with supports on an Ender 3 V2.…
No one was made so I had to do. Do not scratch the tank motorcycle is therefore very suitable for motorcyclists Print Settings Printer: Velleman k8200 Rafts: No Supports: No Resolution: 0,15 Infill: 60% Category: Accessories
Supporto freccia realizzata per un amico, che non trova piu' il pezzo in vendita. La parte interna e' stampata in materiale Asa e la parte esterna e' stampata in Tpu 85 Shore . La parte interna si aggancia tramite 2 viti al parafango…
EN: Bar for Phone Mount on Kawasaki Versys 650 Motorcycle It consists of two main support arms and two counter-pieces, which fix the supports to the wind shield bracket, as well as a metal part described below. Bill of Materials: M5x15…
Footpeg Adapter, because the original springs are smaller in height. Fits with DRC Footpegs for Yamaha YZ/WR ... on my Tenere 700 with original spring and bolt. Printed with Polypropylen Carbonfiber.
3D-Scan of the Kawasaki Key Body There's one Version as the original Scan and one simplier remeshed Version of the Scan.
TAPONES HORQUILLA DELANTERA KAWASAKI Z900 - KAWASAKI Z900 FRONT FORK PLUGS
I designed these plugs to fit into the voids in the frame for the mounting bolts. I felt this cleans up the sides of the bike and prevent debris and water from entering. I printed many of these for others and now that I no longer have…
