Kawasaki KZ650SR Motorcycle Tank Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D Printable motorcycle tank cap for a Kawasaki KZ650SR tank.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3D Printable motorcycle tank cap for a Kawasaki KZ 650 SR tank. The original is expensive and very hard to come by, so I decided to 3d print one instead.
Hopefully this could be a template mechanism that can be remixed to suit other tanks.
I printed this in Nylon 12 Carbon Fibre filament (PA12 + CF15) which is suitable for this application due to its moisture and chemical resistance properties.
Extra bits needed:
- 2 x 3mm x 20mm screws
- 3 x 3mm x 8mm screws
- 2 x 3mm x 10mm grub screws
- 1 x 5mm x 30mm spring
- 2 x 7mm x 12mm spring
Print one of each file, and 2x pawls. The springs and screw lengths aren't strict and can probably be substituted for what-have-you. There is also a rubber gasket which could be made or purchased quite cheaply, the part number is 11009-1053. Dimensions of the gasket are 53 OD, 34 ID, x 3mm thick.
Please refer to the below video for assembly instructions.