LEGO mosaic compatable wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily hang your various LEGO art frames up with these brackets and command strips
- Ocena
- 5 / 5
- Polubienia
- 92
- Pobrania
- 232
- Wydruki
- 3
- Wyświetlenia
- 3396
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This wall hook is compatible with piece 67139 which is used as a hanger bracket by LEGO's line of dot mosaic art sets.
Hanger Hook
I printed these standing up on their bottom end with a raft just to be on the safe side.
This hanger accommodates medium sized command strips (19 x 52.4mm / ¾ x 2in)
Spacer Version
This version lets you slot two hooks onto a connecting beam into a single pre-spaced assembly. This is what I have opted to use for my 4 prints as it made spacing out and leveling my frames a lot easier than trying to independently place 8 hooks.
I do not know how this spacer would work with the world map set, but should be compatible with any 3 tile (48 stud) wide sets by placing the hanging brackets in slightly from the corners. (see attached image) The spacer will print just fine at a 45 degree angle on a Prusa MINI.
I applied a thin layer of super glue and let the puzzle piece connections dry before attaching the command strips.