1 / 2
Logitech G29 / G920 steering knob Remix for M3 Screws — zdjęcie 1
1 / 2

Logitech G29 / G920 steering knob Remix for M3 Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its a remix of Schlumpf999s steering wheel knob, but now it uses M3 screws.

Ocena
0 / 5
Polubienia
17
Pobrania
152
Wydruki
1
Wyświetlenia
646
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

-Parts List:

  • M3 Screw (atleast 16mm long)

  • M3 Nut (can also be replaced with a threaded insert)

  • Plastic Glue

 

-Assembly:

Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue both halves together while they are on the shaft but avoid getting glue on the shaft. After the Glue has dried you need to place it on a suitable position on your sterring wheel and screw it with and M3 screw and nut together. (You can also replace the nut with a threaded insert)

Tagi