Repair clip for Savic Sputnik XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original slide on tabs with a M6 bolt to attach more securely to the cage bars.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
The original plastic tabs of the Savic Sputnik XL small animal homes kept deforming and not securely holding the house to the top of the cage bars.
I made a clip that snugly fits in the slot of the tabs and allows a M6 bolt to be put through it. Therefore - now it is possible to securely attach the Sputnik to the top of the cage and not worry about it coming loose.
Before attachment - it is necessary to cut off the existing plastic tabs off.


Hardware needed:
3x Hex head M6 bolt - at least M6x16 - acc. to DIN 933 or ISO 4017. Can't comment on imperial sizes, but the clip allows a max of 10mm hex head size.
3x Wing nut M6 - DIN 315 or ISO 5448
3x or 6x Wide washers M6 - I like DIN 9021/1 because they have a large outer diameter.


Printing orientation and supports - only the bottoms of the clips need to be supported.