X-Sense RC01 Pro remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for the X-Sense RC01 remote. Can be attached to any smooth surface with double sided tape.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Because I wanted to have my X-Sense RC01 remote in an accessible location where I can easily grab it, I created this holder for it. It has a little indentation on the back to fit some double sided tape (my tape is 1.0mm thick, so I made the indentation 0.6mm deep).
The remote fits inside the holder very easily. I didn't want to make it too snug, because I wanted to prevent a hassle with getting it out in case of an emergency. You can scale down a few ticks on the depth axis if you think the holder should be more snug.
I was actually aiming for the little circular cutouts at the top to align with the round button on the remote, but I guess I made a mistake with my measurements because they don't align properly. For me it didn't warrant another print, so I left it like this (and in the files uploaded here). In case you want to fix that, I've also uploaded the step files.
The holder in the image was printed on a Bambu Lab P1S with a .16mm profile, and FormFutura rPLA White filament. The orientation was upright, no support needed. The 3MF I used to print it with is uploaded here as well.