1 / 6
Creality Falcon2 Pro - Exterior Door Pass Thru For Ventilation (3" hose) — zdjęcie 1
1 / 6

Creality Falcon2 Pro - Exterior Door Pass Thru For Ventilation (3" hose)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creality Falcon2 Pro - Exterior Door Pass Thru For Ventilation (3" hose)

Ocena
0 / 5
Polubienia
34
Pobrania
102
Wydruki
0
Wyświetlenia
829
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Falcon2 Pro Collection

This is a door exhaust port I use for my laser cutter/engraver which uses a 75mm/3" hose. My door is 44.5 mm thick.

You will need to print this:
door_exhaust_port

and one of these sets exhaust_director_short or exhaust_director_long/removable/rain drain hole.

This was the cheapest way for me to exhaust my machine if I need to repair in the future(replace door vs wall repair).

This uses a friction fit like a shop vac connection for your hose coupler. There is also a cap to plug the hole when not in use. It has openings for (3) 12x3 magnets on the back so you can store this on the door while you have your exhaust hose in place using the port.

Print all pieces as oriented and without supports. (3) perimeters at least for sturdiness.

I cut the hole using a tungsten carbide Dremel bit and the cutting guide.

Mounted using ½" #6 wood screws which self-tapped into the steel with a little pressure. Stop when seated or they will strip.

I install the inside printed piece first, then put caulk on the edge of the printed piece which the external grill will sit against. This helps ensure a seal so all smoke exits your garage.

I use this exhaust grill for the outside installed with caulk. Exterior grill from Amazon - https://www.amazon.com/gp/product/B0C4TQ4S5D/?th=1 This is tapered so use the 3.1" hole measurement for the hole size.

The images are of my old design which was more bulky. I've removed some unnecessary depth.

There is also a downspout to protect the vent and direct the exhaust down vs directly out if you're trying to keep this kinda contained to an area. Glue together and attach with double sided tape.

Tagi