House of marley Positive vibration 2 hinge fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a hinge replacement for some bt headphones
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mine are the bt version but this fix should work with the non bt version. This hinge replaces part of the old hinge which was prone to breaking. The new design cannot hinge, but it is much stronger and keeps the size adjust.
For assembly you'll need 4 screws which are a bit longer than original. You will need to slide the brace onto the part for extra strenght but it is optional. The 4 screws which are too short for reassembly will need to be kept because we need 2 of them for securing the headband.(they will go where the brace slides on)
Print with large layer height and temp for strenght and print the brace so that the hole is vertical, print the other part as is.