Hexagonal Yarn Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted some lightweight (not a lot of plastic) yarn bowl for my sister and kindda accidentally ended with this design
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 464
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Inner diameter is about 180mm (outer about 190mm so it should fit for most common printers)
In the base is a space for a ballast weight (in my case small lead pellets from diving weights) which must be inserted while printing (13.1mm/ 44th layer) and is not later removable. In my case it added about 250g of added weight to 200g of natural weight of the model.
Printed with 10% infill and 4 perimeters for better strenght, “spiral hole” (or a hook if you want) I made with 100% concentric infill to avoid snapping. Only 5 points of contact is necessary for organic supports.