1 / 5
Hexagonal Yarn Bowl
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Inner diameter is about 180mm (outer about 190mm so it should fit for most common printers)
In the base is a space for a ballast weight (in my case small lead pellets from diving weights) which must be inserted while printing (13.1mm/ 44th layer) and is not later removable. In my case it added about 250g of added weight to 200g of natural weight of the model.
Printed with 10% infill and 4 perimeters for better strenght, “spiral hole” (or a hook if you want) I made with 100% concentric infill to avoid snapping. Only 5 points of contact is necessary for organic supports.