Counting matching models…
Designed after my wife asked me to make something she saw on social media. Works best with a drawer liner affixed to the bottom to prevent slipping. The top is made to have a 3x6mm magnet inserted to keep it in place. Added an updated…
This model was heavily inspired by these two: https://www.printables.com/model/1022658-gridfinity-sewing-thread-holder https://www.printables.com/model/991739-gridfinity-sewing-reelthreadspool-holders I just wanted to change 2 things…
This is the CAD translation of a traditional Chinese yarn maker wheel (not sure if it is supposed to be translated this way). Designed in Onshape
Couples the shaft and pin from the input to the gear for the output
UPDATE 2026-04-06: I made a new version here: Use this yarn cake holder to keep your yarn from rolling away as you knit or crochet. Parts I used these “detachable swivel clasps” to connect the spinner to both the lanyard and to the base.…
The yarn holder can hold two individual balls of yarn or a larger skein of yarn. The base has an opening so that it can be filled up with sand. I used fine quartz sand from the hardware store. The hole was then closed up using the plug.…
Designed after my wife asked me to make something she saw on social media. Works best with a drawer liner affixed to the bottom to prevent slipping. The top is made to have a 3x6mm magnet inserted to keep it in place. Added an updated…
A simple spindle for yarn that does not require bearings. and uses very minimal supports. The spindle part is kind of thick, but I mainly use it with yarn cones. That being said, I have stabbed skeins, balls, and cakes on it before and it…
Flippy V.1 a snappy, light and portable yarn holder (New single version will be coming up soon with also different size hole for magnet) (You can add negative space in the Prusa slicer, where the magnets goes, in order to have the size…
Non-printable parts needed: 608 ball bearing (but you can use printed one instead) 8x2mm magnets (6 pcs) 8 mm self adhesive rubber pads (4 pcs) M3x10 screw with washer M3 brass insert (if using holder part; holder_no_insert do not need…
Remix of Jocke's yarn bowl with screw on lid. I simplified the yarn slot and reduced the amout of threads on the lid so it could be attached and removed quicker.
An update on the yard spinner model. Completely redesigned hollow base for additional weight and reduced print time. I used .177 steel coated BB's (<1000) but you can use anything that will fit like hex nuts/etc. The design does…
While printing the original for a friend, I was struggling with getting the rods to print as well as I'd like. Printing them vertically made them look nice, but the prints took a very long time and were prone to bed adhesions issues.…
Update 1 (2025-02-04): added a basic compliant snap-closure, improved built-in supports This is a print-in-place model. I did my best to make this stable and consistent to print without manual tuning / supports. Some recommendations: Use…
Lazy Susan for yarn balls and cones as requested by the Mrs for her sock knitting machine (CSM) Uses 1x 608 bearing. I recommend supports for the top of the lazy susan for better fit of the bearing when installed.
Simple adapter for yarn cones. FreeCAD file included for adjusting if your cones are sized differently. No infill needed or included in model.
A compact, modular rotating yarn holder designed for smooth and stable yarn feeding. The bearing ensures effortless rotation even with small yarn balls, preventing tension on the yarn. The base can be weighted with concrete or fine sand…
This is a trivial remix, taking the idea of magnet-based latching from https://www.printables.com/model/1541780-yarn-gator and adding it to the four-hole version from jaughn's Parametric gator design. The magnets I had available are…
Replacement part for a Singer/Superba (and therefore proabably white, phildar...) knitting machine. This is part of the second yarn guide that you need for some multi-color knits. The part helps to lock the second yarn guide in place…
Simple yarn twister stack to combine (and twist) two yarns into one thread. My lovely wife started knitting as a hobby, so I made this as a little help. One base, one top plate and two stack arms required for the whole assembly. Be…
A portable yarn spinner I designed for a friend (inspired by an overpriced item in the TikTok shop) to fit nicely in a small knitting bag. This design requires a 608 ball bearing, an M3x4mm heat-set insert, and an M3x5 mm bolt. The bolt…
This is a weaver's jig for cutting specific lengths of yarn and thread. To fully assemble the jig, you will need a long piece of 1x3" wood board and a short length of 1/2" dowel. There are three main pieces to the jig: the end bracket,…
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly . The model includes a built-in reinforced spiral . The internal spiral is a separate part and…
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
Cute yarn bowl for bunny lovers. Yarn hole can be blocked with a tail when not used. No supports needed for the bowl. Only for the tail. The bowl on the photos was printed at 70% scale, 0.24 layer height with Bambu PLA Wood color classic…
A fork and a 13 mm hex bit to allow for faster winding. I did run into many issues upon using my cordless drill, though.
I wanted to be able to remove my projects from the feeder slots without cutting the yarn, while still having the nice control of keeping the yarn separated while working. Other than the noted differences, everything was printed as is from…
This is my double yarn cake holder design from Onshape re-published in convenient, pre-exported form. It's a lightweight, somewhat portable kate for knitting directly off a pair of yarn cakes. Non-printed shafts required You will need to…
Holds two wax cylinders for yarn to run through on Silver Reed SK840 knitting machines. Also works on the tension masts for my SK500 and SK830. Not sure if this will fit the SR punchcard machines, I think they might have a different…
Grid as a Base 11x Comb for dense packing of smaller spools 6x Comb for larger spools 5x 45° Comb for the small ones so you still see the colour Pin as a single pin Brace and foot to raise the grid - the Brace has an orientation!
I redesigned my yarn cake spinner since my wife found my old version to be a bit tipsy when she was using it on uneven surfaces such as on our bed. This new one is standalone and doesn't require a hanger base like the old one does. It's a…
You need to have 3xM3 inserts, 3xM3-8mm screw, magnet10mm.
How to make into yoyo: tie string around middle and wrap it up How to use as yarn holder: untangle yarn and wrap it around middle.
A modular yarn cone stacker designed for machine knitters to easily combine multiple threads. Features: Modular Design: Configure with as many tiers as needed (3 tiers tested for maximum stability). Print-Ready: Optimized to fit Original…
Something called A yarn gator. It has one gator clip on each side (Not my version) that you can attach to your purse or yarn bag? My printed version uses D-Rings because i don't have any small gator clips available. My version is also…
This 3D printed vase is a unique addition to any home decor. The intricate yarn design adds texture and looks great printed in fuzzy skin mode! Use it to display some 3d printed flowers or use it to help oranize your desk. The design did…
DE: Die Beiden Teile können zusammengesteckt und die Garnrolle darauf aufgespießt werden. Danach kann das ganze mittels der Öse an ein Objekt oder dem Arm aufgehangen werden und der Spaß kann losgehen. Meine Druckeinstellungen: -PLA…
Fits this yarn winder: https://www.thingiverse.com/thing:4699067/makes drill attachment to fit onto a 14mm shaft with a little wiggle room, the end that goes into the chuck is about 3/8" so should fit in most hand drills
I usually use bread clips to wrap the tail end of my yarn projects. I didn't have one on hand so I made a simple model for a yarn bobbin/end minder. Made them pretty while I was at it. The model is small 30mm x 19.58mm x 2mm. Just big…
This is my second version of the previous yarn holder. Now that the entire upper part rotates freely. My wife loves this new type, this is with a bigger/stronger pole for larger yarns. This type is 30mm. This model in link, are the…
This video goes into more details about how these items are used. The Yarn Parker is device that clips onto the front of the EEW 6 eSpinner and helps hold yarn. The Slitted Reducer goes on the front as another option to park yarn…
A yarn spinner that keeps your yarn tangle-free and organized—perfect for yarn skeins, cakes, donut balls, hard core balls, and cones. Dimensions: Height: 16 cm, Diameter: 11 cm Print settings: Top Surface Pattern: Concentric Infill:…
Own designed yarn bowl Scale to the size you want. Bowl in picture is 167mm wide and 100mm high
This is a simple tool for producing nice, uniform lengths of wool or yarn for latch hook crafting. Simply wrap the wool in a spiral around the cylindrical end, and then slide a pair of scissors down the channel to cut the wool into a lot…
removed the tip it incase it causes yarn to catch while knitting
tired of your yarn rolling well no worry this will help with that. It provides a place to put your spool of yarn so it doesn't roll away.
I have a lot of semi-short yarn to rewind. The tube original spindle is to large so I remix it to a smaller in diameter. I have provided the fusion 360 file to edit to your needs
Remix of the original idea, but with added Inner Spool (original file is broken) and additional caps
I originally made this very simple model because I was working on a crochet project and didn't own a yarn/tapestry needle to finish it off! I like the design because it works well with worsted weight yarn, is very flexible, is very cheap,…
This double yarn holder features a Mandala motif, combining functionality with artistic elegance. It’s ideal for projects requiring multiple colors or yarns, keeping two skeins organized and tangle-free. I used PLA Matte from Bambu Lab.…
Made this design based on my wife's input. Holds a yarn ball. Printed in Petg and also tried with TPU. Both seem to work good. Please post your makes and feedback, thanks!
Replacement part for the upper slide of the Addi Express knitting machines TLDR: Broke my knitting machine, designed and printed a replacement piece. Caught my pants on the tensioner and yarn guide for my knitting machine. SNAP! Still…
Introducing the "Dragon Yarn Bowl" , a stunning piece that's both a decoration and super handy for crafting! Picture a beautifully detailed dragon curled up with its scales all around. In the middle, there's a bowl where you can put your…
My daughter does a lot of knitting/crocheting projects that use multiple colors. I wanted to make her a five yarn ball holder. I added two screw tabs to the existing model so I could attach them to a board
This model was heavily inspired by these two: https://www.printables.com/model/1022658-gridfinity-sewing-thread-holder https://www.printables.com/model/991739-gridfinity-sewing-reelthreadspool-holders I just wanted to change 2 things…
Use Organise carboard yarn spools elegantly and accessibly. Works with full and empty Spools. Fits into any 1x3 Gridfinity slot with at least 5cm clearance above. Origin Went through a friends sewing drawer and she really needs some…
Update! This is version two. I like it a LOT better than version one! I needed something to hold a skein of yarn to keep it from rolling around. This measures approx. 12.5" X 5.5" X3" but can be scaled down for smaller skeins. If you find…
The design is based on a yarn "live laugh love" sign but with the words of Gricko from the DnD group, Legends of Avantris
Inner diameter is about 180mm (outer about 190mm so it should fit for most common printers) In the base is a space for a ballast weight (in my case small lead pellets from diving weights) which must be inserted while printing (13.1mm/…
A simple yarn bowl with a large volume. Printed using a generic rainbow filament
This yarn spool fits mshipmans Yarn Spinner. https://www.printables.com/model/503275-yarn-spinner-rotating-skein-holder-for-crochetknit My wife needed an easy way of creating spools for her tufting gun that can be quickly spooled up.…
Generic copy of: https://www.summerdaycrochet.com/products/yarn-spinner-for-bogg-bag-crochet-knitting-accessory-yarn-holder-summer-day-crochet-crochet-supplies-yarn-supplies-crochet-gift-1 Holds yarn in Bogg Bag. Made for a friend based…
20% infill, no supports 40% infill if you want more durability but 20% worked fine for us around 190g filament printing time took about 6 hours and 40 minutes this was designed for the max volume of the ender 3 v3 se which is 220mm x…
20% infill, i suggest using a brim or try printing this flat which might cause slight sagging on the rounded parts 55g filament i originally printed this laying flat with no supports which worked but had slight sagging on the rounded…
This file is absolutely fantastic, it just needed some tweaks to improve its printability. I split the parts for easier printing. The center of the bowl was floating after sliced so I trimmed 1mm of the bottom so no supports were needed,…
Scaled to fill my print bed. Hollowed it out, and cut a Fibonacci groove and cut off the lid. All done in OrcaSlicerScaled to fill my print bed (225*225). Hollowed it out, and cut a Fibonacci groove and cut off the lid. All done in…
Yarn or Spool holder 20mm Diameter of the rod 2x2 Gridfinity grid
Hello ive created this simple yarnholder for IKEA Skids for my mum. i have also uploaded a file with 20x this piece on one builtplate of a X1C let me know what you think have fun printing
The original Woll Winder model worked great, but I’ve made some adjustments to the handle design. This new version allows the handle to spin freely, making it a bit more comfortable while in use. Parts Required: 1 x M8x80 Cylinder Head…
My wife wanted a yarn spooler tall enough to hold her 10-inch yarn spools she gets from crafting and hobby stores, she also wanted with a hook on top so she could hang it when traveling or not in use. I searched what others have made but…
A basic holder for skeins/spools of yarn. Incorporates a 2 part top piece that requires threaded inserts for easy printing. There is only one size top right now that should be fairly universal, but if you need a different size, please…
My wife has this yarn counter she uses that she got a long time ago. She wanted to give one to a friend, but we could not find it anywhere. The closest we found was an inferior design (in my opinion).…
This 3D-printed yarn bowl is a perfect gift for any knitter, crocheter, or fiber artist who appreciates unique and handcrafted items. It's a truly special piece that will be cherished for years to come.
This is a simple adapter for one of those yarn winders. Spinning yarn remnants can be problematic as the balls don't keep their shape as well as the full yarn skeins. The TP cardboard cores are prefect to keep all the unruly yarn remnants…
My mom is an avid knitter, and was telling me about yarn end minders, and showed me a couple she bought. After seeing a limited number of these stls available for free, or purchase, I decided to make my her one modeled after their dog.…
Version 2.0 Available HEre: https://www.printables.com/model/1367236-yarn-spinner-20 Easy to print and assemble Yarn Spinner. Designed it to make it printer and user friendly as well as filament efficient. Only 2 pieces and a single…
This is the CAD translation of a traditional Chinese yarn maker wheel (not sure if it is supposed to be translated this way). Designed in Onshape
A simple spool of thread to spool up loose yarn or thread. This print is quite thin, so make sure to let your buildplate cool down or your print will be deformed! Happy printing and sowing :)
Fan of this model? A Like and a Make would be more than appreciated! Yarn Bobbin Holder for Crochet & Knitting Keep your yarn organized, tangle-free, and effortlessly accessible with this innovative Yarn Bobbin Holder , designed for…
A simple print. I made mine with .04 mm nozzle, 0.2 mm layer height, 15% infill to give it some weight and one support for the loop. It was a 6 ½ print on my Bambu Carbon X1.
I created this model to help the knitter in my life who asked for a ring that they could wear that would hold yarn while they knit to help maintain tension. I provided models in standard US ring sizes from 4 to 7.5. Leave a message if…
I got a couple of orders for something to keep yarn neatly while knitting and after a quick search i saw that most of the models are quite weak at the bottom so I designed my own. Just print this and glue on a couple of 10mm magnets (make…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.2 mm layer height, 2 wall loops, 10% grid infill, automatic default tree supports at 30 degrees threshold and on build plate only.
Tangle-Free Yarn Organizer – A Must-Have for Crafters! 🧶✨ Tired of messy yarn tangles? Say hello to this 3D-printed yarn bobbin! Designed for knitters, crocheters, and fiber artists, this simple yet effective tool keeps your yarn neatly…
3D scan of a Yarn Yoshi Amiibo done with my Matter and Form 3D scanner.
Printed with following settings Filament: PLA+ Walls/Perimeter: 3 Infill: 10% Infill Type: Triangle
All Parts like rings, lid and bowl separated and repaired for easy printing. All parts are separate STL file. All credits to original designer @3_D_Ideation .
