Yarn Gator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Useful to prevent yarn entanglement between different yarns. The base can be used to keep the yarn gator in place.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 215
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Family member found this idea on an Instagram reel, couldn't find it on Printables, so I designed one myself.
I printed the yarn gator with 15% infill density, with PLA (PETG for supports). It is designed to be printed in place (first print-in-place I have made, any feedback on it will be greatly appreciated :D). I printed the base with standard PLA. The force required to break the supports is substantial, but if you apply it near the pin, it should not break the print itself.
On the other side of the pin, there are 2 holes to insert 5mm x 1.75mm magnets. The magnets are not required for it, especially if used in combination with the base but they are nice to have. The holes are desgined for the magnets to be pressed in, no glue required.
