Ryobi Battery Charger (2024, Model PCG002) - Pegboard Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Ryobi 18V battery chargers (2024, Model PCG002) to pegboard.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Slides in the holes on the bottom of 18V Ryobi battery chargers (Model PCG002 [the one that specifies there are 114mm between the mount holes - see photo] and possibly others) so they can be mounted on pegboard.
My print settings (you may be able to get away with quicker & less material, but this took just under an hour). Oriented on it's skinny side (to avoid poorly oriented layer lines at the “S” part of the model where it sticks into the pegboard), print w support (tree slim to save a few minutes, tree default if you want a nicer looking print), PLA, 100% infill.