1 / 4
Permobil Retractable Joystick Arm Cover (Older Style) — zdjęcie 1
1 / 4

Permobil Retractable Joystick Arm Cover (Older Style)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cover for the retractable joystick mount on older (approx. pre-2019) Permobil wheelchairs.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This cover replaces the stock black plastic one on the retractable joystick arm found on older Permobil chairs. I’m not sure when they switched to the newer style but it appears to have been sometime between 2018 and 2020. If you are looking for a cover to fit the newer style, I have uploaded that as well and you can find it here.

Printing: The cover can be printed in pretty much whichever material you prefer. Just be sure to enable supports for the overhangs at the top of the print.

To install, remove the bolts (4mm hex) one at each end of the retractable joystick arm. Remove the hardware that was being held by these bolts. The black plastic cover can then be removed by popping it up and off of the arm. Reverse the procedure to install the new cover.

I've also upload a STEP file in case you'd like to make any changes.

-Go boldly, my friends. 🖖

Tagi