12.7mm Slimline External Disc Drive Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External Drive Enclosure for your Slimline DVD/CD/Disc Reader.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity) The model has a big cutout in the rear to allow basically any Slimline SATA Adapter to work, and it's great for a Living Room PC Setup or use of any unused Slimline Drive you may have sitting around. I also added a few models with various optical disc standards logos, a blank enclosure, and one without feet if you want to add your own or need a very slim enclosure.
If the drive is a bit too loose, you can add a small piece of Electrical Tape to the edge of the drive, and it should result in a snug friction fit. (There are no Screw Holes.)
The model prints with the back on the Print Bed (for less support material) and will work with 15% or more infill. a 0.20mm Layer Height with PLA should work just fine, PETG results may vary.