1 / 2
Filament Spool Rack (RepRack) for wood blocks 30x40
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using cheap wood blocks (30x40mm) to create a Filament Spool Rack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I had wooden bars 20X40 and had no time to buy pipes. I made this model and decided to share. I used three holders for one shelf 1.5 m long.
I added .3mf in it at once a set (mounting on a wall, modified by the author - https://www.printables.com/model/1025197-reprack-cleat-for-10-screws), as well as the holder of wooden beams itself. And also separately .stl - only the holder itself.
I Printed :
- PETG
- 0,4 nozzle
- 0.3 layer height
- 4 wall loops
- 10% Cross Hatch
Material required:
- 2x wood blocks 20 x 40 mm (The holes are made with a gap of 32x42mm), in your required length
- 2x wood screws per hanger: 3,5 x 16 mm to fix wood
- 2x wall screws per cleat, the screw type would depend on your wall type